product news & information

The Silicone Dipping ink for textile cords dipping.

First ,Preparation: Mesh&Squeegee: 120-150(48T-60T) Mesh number; 65-70 degree Squeegee. Fixer mixing ratio:2% Flash and curing temp: 80℃- 100℃ or by room temp Second , printing process: 1 HD PU water based nylon Ink print for 6-12 layers : HD PU water based nylon Ink     XGS-806          300 G Fixer                            XGS-339           6G  2%    Flash by 80℃- 100℃ or by room temp 2 Red color […]

Preparation: Mesh&Squeegee: 120(48T) Mesh number ; Squeegee 65-75 degrees Squeegee sharp and flat. : Pigments added ratio: For white and fluorescent colors 20%, other colors 10% Catalyst mixing ratio:2% slow dry XG-866B-1for small printing size, fast dry XG-866B-2 for large printing size and first under printing screen. Slow dry and fast dry catalysts can mix together for use to get mid […]

Preparation: Mesh: 180-300(70T-120T) Mesh number ; Squeegee:70-75 degree Flat Squeegee Fixer mixing ratio: 9103 Fixer mixing ratio 1-2% (If under coating clear SND-110 to mix fixer SND-110B 10%) Reducer :0-20% Flash by air or heating by 40-60℃ Cure by waiting over 12 hours or heat by 40-60℃ for 30 minutes Solvent based ink printing process: 1.Under coating Clear SND-110AB print […]

TDS of XG shoelace dipping silicone 1st  Dipping silicone Clear layer 1 time Dipping silicone        XG-20S-1    100G Fast dry silicone catalyst  XG-KB-1    10G  10% (10G silicone to mix with 1G catalyst) Silicone thinner XG-128AH         120-150G   120-150%  (10G silicone to mix with 12-15G thinner) To dip one time and wait about 40-70 minutes to get the […]

Preparation: Mesh & Squeegee: 120(48T) Mesh number; 65-75 degree Squeegee. Pigments added ratio: For white and fluorescent colors 20%, other colors 10%. Catalyst mixing ratio:10% slow dry XG-MB-1 Mid dry XG-ZB-1. Silicone thinner XG-128A adding ratio:0-20%. Heating Temp and time: cure temp: 60℃~100℃, dry by room temp. Silicone ink printing tips: 1.Elastic silicone ink clear […]

Firstly, to print under printing, Second, to print white silicone, Third, to print colorful silicone, Fourth, to print chameleon powder with printing silicone ink, In the end, to print glossy silicone ink. For the printing process kindly follow the below tips. Screen printing silicone ink preparation and screen printing silicone mixing ratio: 1.Mesh & Squeegee […]

Silicone ink PET films: Two types : one is glossy coating film which will be glossy after heating press on fabric ,another one is matte finish effect after heating press on fabric. Mesh number： 120-200 , Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks. Squeegee：65-80 degree . Printing tips 1. Silicone ink color layer printing for […]

Silicone ink PET films: Two types : one is glossy coating film which will be glossy after heating press on fabric ,another one is matte finish effect after heating press on fabric. Mesh number： 120-200 , Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks. Squeegee：65-80 degree . Printing tips: 1. Transfer silicone color layer […]

Preparation: Mesh&Squeegee: 120(48T) Mesh number; 65-75 degree Squeegee. Pigments added ratio: For white and fluorescent color 20%,other color 10% Catalyst mixing ratio:10% slow dry XG-MB-1 Mid dry XG-ZB-1 Silicone thinner XG-128A adding ratio:0-20% Heating Temp and time: cure temp :80℃,100℃,120℃ or dry by room temp. Silicone ink printing tips: 1 Elastic silicone ink clear printing for […]