Preparation: 120(48T) Mesh number ;65-75 degree Squeegee. For white and fluorescent color 20%,other color 10% 2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using. 0-20% thinner is not necessary for hand printing 100℃- 120℃ for 6-10 seconds Silicone ink printing tips: 1. HD silicone/soft silicone XG-866AH/XG-866AR 60G Fast dry catalyst XG-866B-2 […]
1st : Filling bellow mixing moulding silicone ink together into the mould Moulding silicone XG-360W 60G Silicone catalyst XG-360WB 6G 10% Pigments 1.2-2.4G 2-4% 2nd: Get the hot melt paper on the silicone ink filled mould 3rd. Machine heat press including vacuum , venting and curing together ,this should get special machine with Vacuum funtion […]
Preparation: Mesh&Squeegee: 120(48T) Mesh number; 65-75 degree Squeegee. : Pigments added ratio:For white and fluorescent color 20%,other color 10% Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 ,hand printing to use fast dry catalyst and ,machine printing to use slow dry catalyst or slow dry catalyst and fast dry catalyst to mix together for using. Thinner XG-128A adding […]
G-15T+ &catalyst XG-15B Preparation: Mesh: 30-60(12T-24T) to make thick screen by emulsion.Can use Hollow aluminum screen. Pigments added ratio:4% Catalyst mixing ratio:2% Thinner XG-128AH adding ratio:0-10% thinner is not necessary Heating Temp and time: 150℃ -170℃ for 6-12 seconds , Heating time depends on drying temp. Silicone ink mixing tips: Printing silicone XG-15T 50G Catalyst XG-15B+ 1 G (2%) Pigment XG- 2G (4%) Silicone […]
Preparation: Mesh&Squeegee: 120(48T) Mesh number; 65-75 degree Squeegee. Pigments added ratio: For white and fluorescent color 20%, other color 10% Catalyst mixing ratio: 2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using. Thinner XG-128A adding ratio: 0-20% thinner is not necessary for hand printing Flash cure temp: 100℃- 120℃ for 6-10 seconds Silicone ink printing tips: HD […]
Preparation: Mesh: 30-60(12T-24T) to make thick screen by emulsion. Better to use Hollow aluminum. Pigments added ratio: 2-4% Catalyst mixing ratio: 2% Thinner XG-128AH adding ratio: 0-10% thinner is not necessary Heating Temp and time: 120℃ -150℃ for 6-12 seconds, Heating time depends on drying temp. Silicone ink mixing tips: Printing silicone XG-15A+ 60G Catalyst XG-15B+ 1.2G (2%) Pigment XG- 1.2-2.4G […]
Preparation: Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee. Pigments added ratio:For white and fluorescent color 20%,other color 10% Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using. Silicone thinner XG-128A adding ratio:0-20% Silicone thinner is not necessary for hand printing Heating Temp and time: cure temp :100℃- 120℃ for 6-10 seconds ,Drying temp :120℃- 140℃ for […]
Dipping Ink for Ropes & Tape, Shoelace Dipping Ink Tips Color effect to dip 2-4 times： Dipping ink XGF-5338/5338C 100G (5338C harder hand feel) Color pigments 2-4G 2-4% Fixer XGF-313 1-2G 1-2% Purified water 5-20G 5-20% If need glossy effect after color to dip Glossy Dipping Ink XGF-110L for 1 time: Glossy Dipping Ink XGF-110L 100G Fixer XGF-313 […]
Conductive Silicone for Conductive Gloves Printing Gloves Printing Conductive Ink Preparation: Mesh&Squeegee: 100-120(40-48T) Mesh number; 65-75 degree Squeegee. Catalyst mixing ratio:2% Thinner XG-128A adding ratio:0-20% Heating Temp and time: Flash cure temp: 100℃- 120℃ for 6-10 seconds, Drying temp: 120℃- 130℃ for about 2 -3 minutes. Round Silicone for under printing for 2 times: Round silicone XG-866A-2Y 50G Fast dry catalyst XG-866B-2 1G 2% Silicone […]
