Tag Archives: Machine Printing Silicone ink

After printing silicone ink color layer then print Glossy silicone ink for top coating: Glossy top coating for 1-2 times:Glossy silicone ink XG-399-3 50GFast dry catalyst XG-866B-2 1G 2% If for machine printing to use slow dry catalyst.Thinner XG-128AH thinner is not necessary for hand printing, 5-10% is enough for machine printing. Cure by temp […]

Key point forHigh density rock print: 1, When pulling printing thinner mixing ratio 20- 30% 2, The angel between squeegee & table 60-70 degree 3, Keep distance between printing squeegee & screen 4, Less pressure print very soft and slowly 5, Move up screen slowly Printing process: 1st  HD silicone or round silicone transparent under coating for two […]

1st Easier to be 3D high density to get thicker layer than the old high-density silicone ink XG-866A. 2nd Better fastness than XG-866A.3rd Longer keep time under room temp after mixing with catalyst than XG-866A4th Better elastic than the old HD silicone.. NEW HD SILCONE INK XG-866AH BULK GOODS MAKING VIDEO NEW HD silicone ink […]

XG-Soft high density silicone Printing As we konow silicone ink with very good elastic and softness,to be excellent soft effect we have soft silicone  XG-866AR ,today we will talk about how to print high density soft silicone ink effect: 1st: To print XG-866AR soft silicone ink for under costing printing  a.For cotton fabric with haires […]