First ,Preparation:

  1. Mesh&Squeegee: 120-150(48T-60T) Mesh number; 65-70 degree Squeegee.
  2. Fixer mixing ratio:2%
  3. Flash and curing temp: 80℃- 100℃ or by room temp

Second , printing process:

HD PU water based nylon Ink print for 6-12 layers :

HD PU water based nylon Ink     XGS-806          300 G

Fixer                            XGS-339           6G  2%   

Flash by 80℃- 100℃ or by room temp

Red color smooth PU water based nylon Ink print for 3-4 layers

Red PU water based nylon Ink      XGS-302        200 G

Fixer                            XGS-339           6G  2%   

Flash by 80℃- 100℃ or by room temp

Matte or Glossy PU water based nylon Ink for top print for 1-2 layers

A.Matte PU water based nylon Ink for top print for 1 layer

Matte PU water based nylon Ink      XGS-110M        200 G

Fixer                               XGS-339           4G  2%   

Flash by 80℃- 100℃ or by room temp

B.Glossy PU water based nylon Ink  for top print for 1 layer

Glossy PU water based nylon Ink      XGS-110        200 G

Fixer                                XGS-339           4G  2%   

Flash by room temp

For Glossy PU water based nylon Ink, it is better to cure at room temp can get a better glossy effect.

HD PU water based nylon ink for knitting shoe upper printing
HD PU water based nylon ink for knitting shoe upper printing
HD PU water based nylon ink for knitting shoe upper printing

Leave a Reply

Your email address will not be published.

  • *

    code