Tag Archives: Silicone Printing on Tshirt

Transfer HD glossy silicone stickers making tips Silicone ink PET films: To choose matte coating PET films Mesh number： 120-200, Mesh(screen film )thickness 0.1-0.2MM, it depends on printing Artworks. Squeegee：65-80 degrees. Printing tips: Hot melt glue XG-360R-2print for 6-8times When printing glue to use cyclohexanoneto liquid the glue, mixing ratio 10%.This type of glue easy to be […]

A. After 3 times brush printing should add 10-20% more thinnerB. Very liquid silicone full coating on the screen.C. 60-70 degree angel between squeegee and printing screen.D. Printing very soft to get in drop though the mesh and pull up the screen to get high density.

What is Silicone Ink? Silicone ink, also called screen printing silicone or silicone-based ink is a kind of environmentally protective screen printing ink that is used for printing on fabric and leather. for example, on T-shirts or Shoes. It is mainly used in the textile printing industry. It is a very good substitute for traditional oil-based screen […]

How to make flocking by silicone ink? Preparation: Mesh&Squeegee: 120(48T) Mesh number; 65-75 degree Squeegee. Catalyst mixing ratio:2% after mixing with catalyst about 4 hours of operation time. Flash cure temp: 100℃- 120℃ for 6-10 seconds. Drying temp: 120℃- 140℃ for about 2 -5 minutes. Flocking silicone printing tips: Flocking silicone mixing:Flocking silicone XG-20000A 100GSilicone […]

Transparent High density glossy silicone ink printing tips: Preparation: Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee. Pigments added ratio:For white and fluorescent color 20%,other color 10% Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using. Thinner XG-128A adding ratio:0-10%    thinner is not  necessary  glossy top coating printing Heating Temp […]

After printing silicone ink color layer then print Glossy silicone ink for top coating: Glossy top coating for 1-2 times:Glossy silicone ink XG-399-3 50GFast dry catalyst XG-866B-2 1G 2% If for machine printing to use slow dry catalyst.Thinner XG-128AH thinner is not necessary for hand printing, 5-10% is enough for machine printing. Cure by temp […]

Key point forHigh density rock print: 1, When pulling printing thinner mixing ratio 20- 30% 2, The angel between squeegee & table 60-70 degree 3, Keep distance between printing squeegee & screen 4, Less pressure print very soft and slowly 5, Move up screen slowly Printing process: 1st  HD silicone or round silicone transparent under coating for two […]

Welcome to Contact us for More details of pineapple silicone printing effect.

The TDS is for Xingguang HD (High-density printing) Effect for Waterproof Migration Nylon fabric. Here below are some relevant videos for reference.

Usually, It needs a Silicone Agent used for silicone waterproof printing.