Conductive Silicone for Conductive Gloves Printing

Gloves Printing Conductive Ink

Preparation:

Mesh&Squeegee: 100-120(40-48T) Mesh number; 65-75 degree Squeegee.

Catalyst mixing ratio:2%   Thinner XG-128A adding ratio:0-20%

Heating Temp and time: Flash cure temp: 100℃- 120℃ for 6-10 seconds,

Drying temp: 120℃- 130℃ for about 2 -3 minutes.

Round Silicone for under printing for 2 times:

Round silicone       XG-866A-2Y    50G

Fast dry catalyst        XG-866B-2       1G    2%

Silicone thinner      XG-128AH      10G  10%  

Cure by temp of 120℃ 6-10 seconds.

If fabric with hairy or want to get a more smooth effect kindly assist by heat press machine or iron after first time printing. After printing keeps wet to heat press by temp 150-170 degrees for 10-20 seconds.

Conductive silicone printing for 3 times : 

Conductive silicone        XG-866D        50G

Fast dry catalyst           XG-866B-2       1G  2%  

Silicone thinner       XG-128AH      5G  10% Cure by temp of 120℃ 6-10 seconds.

After printing finish, heat by 120℃- 140℃ for about 2 -5 minutes.

Huizhou Yirun Silicone Co., Ltd.

Dongtaiheng Industrial District, Xinxu, HuiyangArea Huizhou city Guangdong province China 516223

Tel:+86-0752-3620489  FAX:+86-0752-3522837  Cell:+86 18319607489    Email:ceo@xgsilicon.com

Conductive Silicone Ink
Conductive Silicone

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用*标注

我们将24小时内回复。
取消

Hi ,this is Belinda,May I have your name? Which type of silicone ink are you interested in?