Preparation:

1.Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.

2.Pigments added ratio:For white and fluorescent color 20%,other color 10%

3.Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.

4.Thinner XG-128AH adding ratio:0-20% (for brush and pulling stone printing need 20-30%thinner)

5.Heating Temp and time: Flash cure temp :100℃- 120℃ for 6-12 seconds ,Drying temp :120℃- 140℃ for about 2 -5 minutes.

1.HD silicone under coating for two times

HD silicone XG-866AH/866A 300G

Fast dry catalyst XG-866B-2 6G 2%

Thinner XG-128AH 30G 10%

Heating temp 120-140degree

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?