Process:

Silicone ink PET films:

Matte film Mesh number: 120-200 (48-80T) , Mesh(screen film )thickness 0.1-0.2MM,it isdepends on printing Artworks.

Squeegee:65-80 degree .

Printing tips:

1.Transfer silicone color layer printing for 4-8 +layers

Transfer HD silicone XG-20AH 100G

Pigments Red XG-302 10G 10%

Silicone catalyst XG-TMB-1 10G 10%

Silicone thinner XG-128AH 10-20G 10-20% Flash by 80 to100 degree

2.Transfer crossing linker 2 layers

Silicone crossing linker XG-360Z-3X 50G

Crossing linker agent XG-866B-2+ 3-4G 6-8% Flash 100-120 degree

3.Hot melt glue XG-360R-2 or XG-360R-3 print for 6-8 layers

To mix 5-10% cyclohexanone to liquid the glue,if glue to be thick and choke the mesh screen. If print glue first need to print 2 times glue more than print silicone ink first. Flash by room temp or by 80-100 degree.

4.After finish to bake in the oven by 100 degree for 30 minutes .

5.Heat press the sticker on the heat transfer press machine by the temp of 160-170

degree for 12-18 seconds under pressure of 4KG.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?