Silicone ink printing tips:

1.HD silicone XG-866A/866AH for under coating and high density printing for 2-8 times

HD silicone XG-866A/866AH 60G

Fast dry catalyst XG-866B-2 1.2G 2% If machine printing to use slow dry catalyst.

Thinner XG-128AH thinner is not necessary for hand printing,5-20% is enough for machine printing.

Cure by temp of 120℃ 6-10 seconds.

If fabric with hairy or want to get more smooth effect kindly assist by heat press machine or iron after first time printing. After printing keep wet to heat press by temp 150-170 degree for 10-20 seconds.

2.Color effect silicone printing for 3-4 times

HD silicone XG-866A/866AH 50G

White color pigment XG-102 10G

For white and fluorescent color 20%,other color 10%

Fast dry catalyst XG-866B-2 1G 2%

If machine printing to use slow dry catalyst.

Thinner XG-128AH thinner is not necessary for hand printing,5-10% is enough for machine printing. Cure by temp of 120℃ 6-10 seconds.

3.Glossy silicone ink or matte silicone ink for top coating

A. Glossy top coating for 1-2 times

Glossy silicone ink XG-399-3 50G

Fast dry catalyst XG-866B-2 1G 2%

It will be better to use slow dry catalyst XG-866B-1 and fast dry half and half. If for machine printing to use slow dry catalyst.

Thinner XG-128AH thinner is not necessary for hand printing,5-10% is enough for machine printing. Cure by temp of 100-110℃ 10-25 seconds Have to get silicone bubbles out first ,try to use code wind to support and it will be better to use low temp by longer heating time.

B.Matte top coating for 1 time

Matte silicone XG-866M 50G

Fast dry catalyst XG-866B-2 1G 2%

If machine printing to use slow dry catalyst.

Thinner XG-128AH thinner is not necessary for hand printing,5-10% is enough for machine printing. Cure by temp of 120℃ 6-10 seconds. After printing finish, to heat by 100℃ for -20 minutes to get crossing linker with excellent fastness on special coating water proof fabric.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?