Preparation:

1.Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.

2. Pigments added ratio:For white and fluorescent color 20%,other color 10%

3.Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.

4.Silicone thinner XG-128A adding ratio:0-20% Silicone thinner is not necessary for hand printing

5.Heating Temp and time: Flash cure temp :100℃- 120℃ for 6-10 seconds ,Drying temp :120℃- 140℃ for about 2 -3 minutes.

Silicone paste printing tips:

1.Under coating silicone XG-136A-1/XG-136B-1 for under coating printing for 2 times : Under coating silicone XG-136A-1 50G

2.Under coating silicone XG-136B-1 50G

XG-136A-1: XG-136B-1 mixing ratio 50%:50%.

Flash by temp of 120℃ 6-10 seconds. If for machine printing to use XG-136A&XG-136B same mixing ratio.

2A.Color effect silicone printing for 3 times :

HD silicone XG-866AH 50G

White color pigment XG-102 10G For white and fluorescent color 20%,other color 10% Fast dry catalyst

XG-866B-2 1G 2% If machine printing to use slow dry catalyst.

Silicone thinner XG-128AH Silicone thinner is not necessary for hand printing,10% for machine printing.

Flash by temp of 120℃ 6-10 seconds.

2B.Transparent round silicone XG-866A-2Y printing for 3 times

Round silicone XG-866A-2y 50G

Silicone thinner XG-128AH 10G 20%

Fast dry catalyst XG-866B-2 1G 2% this code can not work on machine. Flash by temp of 120℃ 6-10 seconds.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?