Transparent High density glossy silicone ink printing tips:
Preparation:
Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.
Pigments added ratio:For white and fluorescent color 20%,other color 10%
Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.
Thinner XG-128A adding ratio:0-10% thinner is not necessary glossy top coating printing
Heating Temp and time: Flash cure temp :100℃- 120℃ for 6-10 seconds ,Drying temp :120℃- 140℃ for about 2 -5 minutes.
Printing process :
1st: Round silicone ink print for 6-8 times
Round silicone XG-866A-2Y/XG-866A-LK-1 50G
Fast dry catalyst XG-866B-21G 2%
Flash temp: 120 degree.
2nd: Glossy silicone for top coating printing for 1-2 times
Glossy silicone XG-399-3 60G
Fast dry catalyst XG-866B-2 1.2G 2%
Flash temp: 120 degree
Tips for round glossy silicone top coating printing :
A. The angel between squeegee & table 60-70 degree,if manual printing about 45-65 degree
B. Keep distance between printing squeegee & screen
C. Gently& slowly print ,try to get more ink pass through the mesh to get round glossy effect.
3rd After finish printing to heat by 120-140 degree for 2-3 minutes
