How to get silicone HD glossy and HD matte effect by XG silicone ink
To get 3D HD SILICONE glossy and matte effect we should get below machine :

printing table with moving dryer for XG silicone

Oval printing machine for XG silicone
To get 3D HD SILICONE glossy and matte effect we should get below silicone materals :
HD silicone

HD silicone XG-866A

XG-silicone-ink-HD-silicone-XG-866A

XG silicone ink glossy silicone XG-399-3

XG silicone ink Matte silicone XG-866M

XG silicone ink pigments

XG-silicone-slow-dry-catalyst-XG-866B-1
TDS of Xinguang silicone ink for HD effect by:
HD silicone XG-866A Glossy silicone XG-399-3 Matte silicone XG-866M
Preparation:
-
Mesh&Squeegee: 120(48T) Mesh number ;65-75degree Squeegee.
-
: Pigments added ratio:For white and fluorescent color20%,other color 10%
-
Catalyst mixing ratio:2%slow dry XG-866B-1 and fast dry XG-866B-2can mix together for using.
-
Thinner XG-128A adding ratio:0-20%thinner is not necessary for hand printing
-
Heating Temp and time: Flash cure temp :100℃-120℃ for 6-10 seconds ,Drying temp :120℃-140℃ for about 2 -5 minutes.
Silicone ink printing tips:
1.HD silicone XG-866Afor under coating and high density printing for 2-8 times :
HD silicone XG-866A 60G
Fast dry catalyst XG-866B-2 1.2G 2% If machine printing to use slow dry catalyst.
Thinner XG-128AH thinner is not necessary for hand printing,5-20% is enough for machine printing. Cure by temp of 120℃ 6-10 seconds.
If fabric with hairy or want to get more smooth effect kindly assist by heat press machine or iron after first time printing. After printing keep wet to heat press by temp 150-170 degree for 10-20 seconds.
2.Color effect siliconeprinting for 3-4 times :
HD silicone XG-866A 50G
White color pigment XG-102 10G For white and fluorescent color 20%,other color 10%
Fast dry catalyst XG-866B-2 1G 2% If machine printing to use slow dry catalyst.
Thinner XG-128AH thinner is not necessary for hand printing,5-10% is enough for machine printing. Cure by temp of 120℃ 6-10 seconds.
(if need glitter effect then to use elastic silicone XG-866A-LK or round silicone XG-866A-2Y to instead of HD silicone 866A ,and to use glitter powder to instead of silicone pigment,all powders have to be antioxidant )
3.Glossy silicone ink or matte silicone ink for top coating:
A, Glossy top coating for 1-2 times:
Glossy silicone ink XG-399-3 50G
Fast dry catalyst XG-866B-2 1G 2% It will be better to use slow dry catalyst XG-866B-1 and fast dry half and half. If for machine printing to use slow dry catalyst.
Thinner XG-128AH thinner is not necessary for hand printing,5-10% is enough for machine printing. Cure by temp of 100-110℃ 10-25 seconds Have to get silicone bubbles out first ,try to use code wind to support and it will be better to use low temp by longer heating time.
B, Matte top coating for 1 time:
Matte silicone XG-866M 50G
Fast dry catalyst XG-866B-2 1G 2% If machine printing to use slow dry catalyst.
Thinner XG-128AH thinner is not necessary for hand printing,5-10% is enough for machine printing. Cure by temp of 120℃ 6-10 seconds.
After printing finish, to heat by 120℃- 140℃ for about 2 -5 minutes.
XG SILICONE INK HD glossy and HD matte effect printing process videos:
XG silicone ink HD SILICONE glossy and matte finish effect:

XG silicone 3D high density glossy silicone printing effect

XG silicone 3D HD glossy silicone printing effect

xg hd silicone glossy silicone effect
xg silicone glossy silicone effect

XG silicone HD matte silicone effect

XG silicone high density matte silicone

XG silicone high density matte silicone