Preparation:

1.Mesh&Squeegee: 120-150(48T-60T) Mesh number ;65-70 degree Squeegee.

2.Fixer mixing ratio:2%

3.Flash and curing temp :80– 100or by room temp

Printing process:

1.HD PU water based nylon Ink print for 6-12 layers

HD PU water based nylon Ink XGS-806 300 G

Fixer XGS-339 6G 2%

Flash by 80℃- 100℃ or by room temp

2.Red color smooth PU water based nylon Ink print for 3-4 layers

Red PU water based nylon Ink XGS-302 200 G

Fixer XGS-339 6G 2%

Flash by 80℃- 100℃ or by room temp

3.Matte or Glossy PU water based nylon Ink for top print for 1-2 layers

A.Matte PU water based nylon Ink for top print for 1 layer

Matte PU water based nylon Ink XGS-110M 200 G

Fixer XGS-339 4G 2%

Flash by 80℃- 100℃ or by room temp

B.Glossy PU water based nylon Ink for top print for 1 layer

Glossy PU water based nylon Ink XGS-110 200 G

Fixer XGS-339 4G 2%

Flash by room temp

For Glossy PU water based nylon Ink,it is better to cure by room temp can get better glossy effect.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用*标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?