Two types :

one is glossy coating film which will be glossy after heating press on fabric ,another one is matte finish effect after heating press on fabric.

Mesh number: 120-200 , Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks.

Squeegee:65-80 degree .

Printing tips

1.Silicone ink color layer printing for 4-6 layers

Silicone ink XG-866A-3Y 100G

Pigments or special powders 10-20G (10-20% white&fluorescent 15-20% other colors 10%)

Silicone catalyst XG-866B-2 2G 2% Silicone thinner XG-128AH 10-20G 10-20%

Flash by 100 to120 degree.

2.Silicone and transfer agent wet on wet printing for two layers as mid layer

Transfer silicone XG-866A-3Y 50G Silicone thinner XG-128AH 10-20G 10-20%

Silicone catalyst XG-866B-2 1.5G 3% Silicone transfer agent XG-MZ 2.5G 5%

Printing wet on wet for 2 times,keep 100% wet can not heat

3.Spill hot melt powder on wet silicone transfer agent layer immediately

4.After finish, to put into the oven to bake by 100-120 degree for about 10 minutes,if bake higher temp then less time,once hot melt powder 100% melt then it is ok

5.Heat press by 160-170 degree for 10-16 seconds with pressure of 4KG

TIPS:Kindly doing test before the bulk goods printing every time.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注


Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?