Preparation:

  1. 120(48T) Mesh number ;65-75 degree Squeegee.
  2. For white and fluorescent color 20%,other color 10%
  3. 2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.
  4. 0-20%    thinner is not necessary for hand printing
  5. 100℃- 120℃ for 6-10 seconds

Silicone ink printing tips:

1. HD silicone/soft silicone    XG-866AH/XG-866AR        60G

Fast dry catalyst            XG-866B-2        1.2G  2%   If machine printing to use slow dry catalyst.

Silicone thinner             XG-128AH         6G   10%   (XG-866AH better to mix with 10% thinner)

Cure by temp of 120℃ 6-10 seconds.

2. Suede silicone printing for 3-4 times

Puff silicone XG-866ART        60 G

Fast dry catalyst XG-866B-2       1.2G    2%

Color pigment                        6G    10%      10%

Flash temp 100-120degree After finish to heat by 160-170 degree for 2-3 minutes or heat press by heat press machine 165-170degree for 12-16 seconds

XG-HD-silicone-Soft-Suede-Silicone
XG-silicone-Soft–HD-Suede-Silicone
XG-silicone-Suede-Silicone-HD-silicone

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用*标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?