1.Mesh&Squeegee for Screen Printing Silicone paste: 120(48T) Mesh number ;65-75 degree Squeegee.

2.Pigments added ratio for Screen Printing Silicone paste:For white and fluorescent color 20%,other color 10%, chameleon powder mixing ratio10%.

3..Screen Printing Silicone paste Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.

4.Screen Printing Silicone paste thinner XG-128A adding ratio:0-20% Silicone thinner is not necessary for hand

5.Screen Printing Silicone paste Heating Temp and time: Flash cure temp for Screen Printing Silicone paste :100℃- 120℃ for 6-10 seconds ,Drying temp :120℃ for about 2 minutes.

Printing process

1.HD silicone for under printing 1 layer

HD silicone XG-866A 100G

Silicone catalyst XG-866B- 2G 2% Heating temp 120 Degree

2.White silicone print 2 layers

HD silicone XG-866A 100G

White pigment XG-102 20G 20%

Silicone catalyst XG-866B-2 2G 2% Heating temp 120 Degree

3.Color silicone print 2 layers

HD silicone XG-866A 100G

White pigment XG-102 20G 20%

Silicone catalyst XG-866B-2 2G 2% Heating temp 120 Degree

4.Screen printing silicone chameleon powder print 2 layers

Screen printing silicone XG-866A-2Y 100G

Chameleon powder 10G 10%

Silicone thinner XG-128AH 10-20G 10-20%

Silicone catalyst XG-866B-2 2G 2% Heating temp 120 Degree

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用*标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?