Preparation:

  1. Mesh&Squeegee: 120(48T) Mesh number; 65-75 degree Squeegee.
  2. Pigments added ratio: For white and fluorescent color 20%, other color 10%
  3. Catalyst mixing ratio: 2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.
  4. Thinner XG-128A adding ratio: 0-20%    thinner is not necessary for hand printing
  5. Flash cure temp: 100℃- 120℃ for 6-10 seconds

Silicone ink printing tips:

HD silicone XG-866A/866AH for under coating printing for 2-3 times :

HD silicone/soft silicone    XG-866AH/XG-866AR        60G

Fast dry catalyst            XG-866B-2        1.2G  2%   If machine printing to use slow dry catalyst.

Silicone thinner             XG-128AH         6G   10%   (XG-866AH better to mix with 10% thinner)

Cure by temp of 120℃ 6-10 seconds.

2. Foaming Puff silicone printing for 3-4 times

Puff silicone XG-866ARP        60 G

Fast dry catalyst XG-866B-2       1.2G    2%

Color pigment                        6G    10%      10%

Flash temp 100-120degree  After finish to heat by 160-170 degree for 2-3 minutes or heat press by heat press machine 165-170degree for 12-16 seconds

Screen Printing Silicone Puff Silicone, Foaming Silicone
Screen Printing Silicone Puff Silicone, Foaming Silicone

Leave a Reply

Your email address will not be published. Required fields are marked *

  • *

    code