Silicone ink PET films:

Two types:one is glossy coating film which will be glossy after heating press on fabric,another one is matte finish effect afterheating press on fabric.

Mesh number:120-200,Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks.Squeegee:65-80 degree.

Printing tips:

1.Silicone ink color layer printing for 3-4 layers:

Silicone ink XG-866A-2Y 100G

Pigments or special powders 10-20G(10-20%white&fluorescent 15-20%other colors 10%)

Catalyst XG-866B-22G 2%

Thinner XG-128AH 10-20G 10-20%

Flash by 100 to120 degree.

2.Silicone ink clear layer printing 2 -4 layers if needed for high density stickers,if need more high density then print

more times clear:

Silicone ink XG-866A-2Y 100G

Catalyst XG-866B-22G 2%

Thinner XG-128AH 10-20G 10-20%

3.Transparent silicone with catalyst and adhesion agent with harder layer printing:

1).Silicone ink XG-866A-2Y 100G

Catalyst XG-866B-21-2G 1-2%

2).Bonding agent A XG-180A 50G

Bonding agent B XG-180B 5G 10%

Mixing together for printing :Bonding agent AB according to silicone is 50%.Bonding agent B is harder can get silicone inkdry,so if need longer printing time then get silicone catalyst mixing ratio 1%or no need silicone catalyst.Printing wet on wet for 2 times,keep 100%wet can not heat:

4.Spill hot melt powder on wet silicone and adhesion agent layer immediately.

5.After finish,to put into the oven to bake by 100-120 degree for about 10 minutes,if bake higher temp then lesstime,once hot melt powder 100%melt then it is ok.

6.Press the stick on the heat transfer press machine by the temp of 160-170 degree for 10-16 seconds with pressureof 4KG.TIPS:Kindly doing test before the bulk goods printing every time.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?