1.Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.

2.Pigments added ratio:For white and fluorescent color 20%,other color 10%

3.Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.

4.Thinner XG-128A adding ratio:0-20% thinner is not necessary for hand printing Heating

5.Temp and time: Flash cure temp :100℃- 120℃ for 6-10 seconds ,Drying temp :120℃- 140℃ for about 2 -5 minutes

Silicone ink printing tips

1.HD silicone XG-866A/866AH for under coating and high density printing for 2-8 times :

HD silicone XG-866A/866AH 60G

Fast dry catalyst XG-866B-2 1.2G 2% If machine printing to use slow dry catalyst.

Thinner XG-128AH thinner is not necessary for hand printing,5-20% is enough for machine printing. Cure by temp of 120℃ 6-10 seconds. If fabric with hairy or want to get more smooth effect kindly assist by heat press machine or iron after first time printing. After printing keep wet to heat press by temp 150-170 degree for 10-20 seconds.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注


Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?