Preparation

1.Mesh: 180-300(70T-120T) Mesh number

2.Squeegee:70-75 degree Flat Squeegee

3.Fixer mixing ratio: 9103 Fixer mixing ratio 1-2% If under coating clear SND-110 to mix fixer SND-110B 10%

4.Reducer :0-20%

5.Flash by air or heating by 40-60℃

6.Cure by waiting over 12 hours or heat by 40-60℃ for 30 minutes

1.Under coating Clear SND-110AB print for 1 time

Under Coating Solvent Based SND-110A 20G

Under Coating Clear Fixer SND-110B 2G 10%

Flash by air or heating by 40-60

2.Color Solvent Based paste for 3-4 times

White Solvent Based paste SND-102 40 G

Solvent Based Fixer SND-9103 0.4- 0.8G 1- 2%

Solvent Based reducer 4-8G 10-20%

Flash by air or heating by 40-60℃

After finishing printing to Cure by waiting over 12 hours or heat by 40-60℃ for 30 minutes.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?