1.Mesh:Mesh number 100-150(10T-60T)
2.Squeegee:60-70 degree
3.Pigments ratio:5-15%，white less than 20%
4.Catalyst ratio:2% XG-866A-1(slow dry)
5.Thinner XG-128A adding ratio:0-15%
6.Retarder ratio:0.2-0.5%（ glossy silicone needed）
7.Flashing dry temp:120℃-140℃for 6-10 seconds
Drying temp:120℃-150℃ for about 2-5 minutes
The ratio are adjusted according to your own products.
