1.Color transfer silicone layer print 4 + layers

Transfer silicone XG-866A-2Y 100G

Silicone Pigments 10-20G (10-20% white&fluorescent 15-20% other colors 10%)

Silicone catalyst XG-866B-2 2-3G 2-3%

Silicone thinner XG-128AH 10-20G 10-20%

Flash by 120 degree. If need high density then print more layers

2.Crossing linker print for 2 layers

Crossing linker XG-360Z-3X 50G

Crossing linker catalyst XG-866B-2 2.5 G 5%

Flash by 100 degree.

3.Hot melt glue XG-360R-2 print for 4-6 layers

To use cyclohexanone to liquid the glue,mixing ratio 10%,if glue to be thick and choke the mesh screen Flash by room temp or by 80-100 degree.

4.After finish, put into the oven to bake by 100 degree for 30 minutes .

5.Heat press the sticker on the heat transfer press machine by the temp of 160-170 degree for 10-16 seconds under pressure of 4KG.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?