1.To print HD silicone paste for under coating prining fore 2-4 times

HD silicone XG-866AH/866A 300G

Fast dry catalyst XG-866B-2 6G 2%

Thinner XG-128AH 30G 10%

2.To print HD silicone mix with yellow pigments for color printing for two times to get good coverage

HD silicone XG-866AH/866A 300G

Fast dry catalyst XG-866B-2 6G 2%

Color pigment 30G 10-20%(White&Fluorescent color 20%)

Thinner XG-128AH 30G 10%

3.To print round silicone to mix with gloden powders for 3 times

Round silicone XG-866A-2Y 300G

Fast dry catalyst XG-866B-2 6G 2%

Golden powder XG-902 30G 10%

Thinner XG-128AH 30G 10%

4.To print glossy silicone paste for top coating printing for 1-2 times

Glossy sillicone XG-399-3 400G

Fast dry catalyst XG-866B-2 8G 2%

Glossy sillicone for top coating print for 1-2 times

Flash temp 120-140 degree,for glossy silicone paste printing to use low temp like 120 degree will be better.

Tips for glossy printing

A.The angel between squeegee & table 60-70 degree,if manual printing about 45 degree

B.Keep distance between printing squeegee & screen

C.Less pressure print very soft and slowly try to get more paste pass through the mesh to get round glossy effect.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?