Preparation

1.Mesh&Squeegee: 300(120T) Mesh number ;70-75 degree Squeegee.

2. Pigments added ratio:10-20%

3.Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.

4.Thinner XG-128AH adding ratio:20%

5.Heating Temp and time: Flash cure temp :120℃- 140℃ for 6-10 seconds ,Drying temp :120℃- 140℃ for about 2-3 minutes.

Silicone paste printing tips

HD silicone XG-866A/866AH 100G

Color pigment 15G 15%

Fast dry catalyst XG-866B-2 2G 2% If machine printing to use slow dry catalyst.

Thinner XG-128AH 20G 20%

Flash by temp of 120℃ for 6-10 seconds.

If dark color fabric print CMYK effect need to print a full screen printing white color for 1-2 times first then print CMYK effect.

If fabric with hairy have to print a full screen printing for under printing two times ,for first

time printing assist by heat press machine or iron after first time printing to get good smooth.

After printing keep wet to heat press by temp 150-170 degree for 10-20 seconds.Second printing same as normal silicone printing heat by 120℃- 140℃ for 6-10 seconds. After finish to heat by heating tunnel by 120-140 degree for 2 -3 minutes.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?