Mesh number 48T-60T, flash 7-8 sec with temp 120°C tear resistance, not easy to deformation

1.Color transfer silicone layer print 4 + layers

Transfer silicone XG-866A-2Y 100G

Silicone Pigments 10%

Silicone catalyst XG-866B-2 2%

Silicone thinner XG-128AH 10-20G 10-20%

Each layer must flash to dry before print another,If need high density then print more layers

2.Crossing linker print for 3 layers

Crossing linker XG-360Z-3X 50G

Crossing linker catalyst XG-866B-2 2.5 G 5%

First time need to flash dry ,last 2 times do not flash

3.Hot melt glue XG-360R-2 print for 4-6 layers

yclohexanone to liquid the glue,mixing ratio 10%,if glue to be thick and choke the mesh screen Flash by room temp or by 80-100 degree.

4.After finish, put into the oven to bake by 100 degree for 30 minutes .

5.Heat press the sticker , Cut the label into pcs and press on fabric ,After it gets cool , tear the paper,The label will be firmly stick with fabric

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?