Silicone ink PET films:
To choose matte coating PET films Mesh number ： 120-200 , Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks.
Squeegee：65-80 degree .
1.Hot melt glue XG-360R-2 print for 6-8 times
When printing glue to use cyclohexanone to liquid the glue,mixing ratio 10%.This type
of glue easy to be thick and mesh printing.
Flash by room temp or by 100-120 degree.
2.Mid layer crossing linker printing for 2 times:
Crossing linker XG-360Z-3 60G. Crossing linker agent XG-360Z-3B 3G 5%
Flash by 100 to120 degree.
3.Silicone ink clear layer printing 4 -8 layers:
Silicone ink XG-866A-2Y 100G. Catalyst XG-866B-2 2-5 G 2-5%. Thinner XG-128AH 10-20G 10-20%
Hot melt glue with solvent chemicals so will get silicone ink not easy or can not dry ,so for first 2 times clear silicone have to mix with more catalyst like 3-4%.More catalyst can get silicone dry fast also the print time will be short,so have to mix small quantity silicone with catalyst to get no waste.After two layers clear silicone if need to print more times then 2% catalyst is ok.
Flash by 120 to140 degree. if needed for high density stickers,if need more high density then print more times clear printing.