Preparation

1.Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.

2.Pigments added ratio:For white and fluorescent color 20%,other color 10%

3.Catalyst mixing ratio:10% slow dry XG-MB-1 Mid dry XG-ZB-1

4.Silicone thinner XG-128A adding ratio:0-20%

5.Heating Temp and time: cure temp :60℃~100℃,dry by room temp.

Silicone paste printing tips

1.Elastic silicone paste clear printing for 4-6 times

Elastic Silicone XG-130A 50G

Elastic Silicone XG-130B 50G

Silicone thinner XG-128AH 10G 10%

Cure by 60℃~100℃, or by room temp. If need fast dry then can mix with catalyst XG-866B-2 1-2%

2.Color effect silicone printing for 3-4 times

Elastic Silicone XG-130A 50G

Elastic Silicone XG-130B 50G

Silicone pigments XG-501 10G 10%

Silicone thinner XG-128AH 10G 10%

Cure by 60℃~100℃, or by room temp. If need fast dry then can mix with catalyst XG-866B-2 1-2%

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?