1.Tiping silicone Clear layer 1 time

Dipping silicone XG-20S 100G

Fast dry catalyst XG-KB 10G 10%(10G silicone to mix with 1G catalyst)

Thinner XG-128AH 100-120G 100-120%(10G silicone to mix with 10-12G thinner)

To tip one time and wait about 40-70 minutes to get ink layer surface dry by room temp,after ink layer surface dry to heat cut.

2.Tipping silicone Color layer 2-3 times

Tipping silicone XG-20S 100G

Color pigment 2-4G 2-4%(10G silicone to mix with 0.2-0.4G color pigment)

Fast dry catalyst XG-KB 10G 10%(10G silicone to mix with 1G catalyst)

Thinner XG-128AH 100-120G 100-120%(10G silicone to mix with 10-12G thinner)

To dip 2-3 times color dipping silicone,after dipping to wait about 20-30 minutes to get ink layer surface dry by room temp to dipthe other times.

3.Tipping matte or glossy silicone for top coating dipping

Matte silicone XG-136M 100GGlossy siliconee XG-399 for supper glossy

Fast dry catalyst XG-KB 10G 10%(10G silicone to mix with 1G catalyst)Thinner XG-128AH 100-120G 100-120%(10G silicone to mix with 10-12G thinner)

If need supper glossy effect then need dip glossy silicone ,due to glossy silicone is very liquid so 100%is enough no need120%.Like 10G glossy silicone mix with 10G thinner.After finished to wait for at least 1-2 days to get silicone ink 100%dry.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?