Printing tips for silicone pulling printing and suede puff silicone effect:
Preparation
1.Mesh&Squeegee:100-120(40-48T)Mesh number ;65-75 degree Squeegee.
2.Pigments added ratio:For white and fluorescent color 20%,other color 10%
3.Catalyst mixing ratio:2%slow dry XG-866B-1 and fast dry XG-866B-2.Fast dry catalyst for hand printing,slow dry or slowand fast dry mix together for machine printing.
4.Silicone thinner XG-128AH adding ratio:0-20%Silicone thinner is not necessary for hand printing
5.Heating Temp and time:Flash cure temp:100℃-120℃ for 6-10 seconds,Drying temp:120℃-140℃ for about 2 -3 minutes.
Silicone ink printing tips:
1.HD silicone XG-866AH/866AH/866AR+for under coating 2-5 layers:
HD silicone XG-866A/866AH/866AR+ 60G
Fast dry catalyst XG-866B-21.2G 2%
Silicone thinner XG-128AH 3-6G 5-10%
Flash by temp of 120℃ 6-10 seconds.
If cotton fabric with hairy to chose soft HD silicone XG-866AR+,to get more smooth effect kindly assist by heat press machine
or iron on second or third layer printing.After printing keep wet to heat press by temp 150-170 degree for 10-15 seconds.
2.Color effect silicone printing for 2-3 times:
HD silicone XG-866A/866AH/866AR+50G
White color pigment XG-10210G For white and fluorescent color 20%,other color 10%Fast dry catalyst
XG-866B-2 1G 2%
Silicone thinner XG-128AH 3-6G 5-10%
Flash by temp of 120℃ 6-10 seconds.
3.Chameleon powder round silicone effect print for 2-3 times:
Round silicone XG-866A-2Y 50G
Chameleon powder 5G
Fast dry catalyst XG-866B-21G 2%
Silicone thinner
XG-128AH 10G 20%Flash by temp of 120℃ 6-10 seconds.
