Silicone ink PET films:

one is glossy coating film which will be glossy after heating press on fabric ,another one is matte finish effect after heating press on fabric. Mesh number:150-200 , Mesh ,it is depends on printing Artworks. Squeegee:65-80 degree .

Tips:

1.Silicone crossing linker printing for 2 layers

Silicone crossing linker

XG-360Z-3X 100G

Silicone pigments 10-20G (10-20% white&fluorescent 15-20% other colors 10%)

Silicone catalyst

XG-866B-2 5G 5%

First layer printing Flash by 100 degree second layer print to keep 100% wet then Spill

hot melt powder immediately.

2.After powdering, to put into the oven to bake by 130-150 degree for about 3-10

minutes,if bake higher temp then less time,once hot melt powder 100% melt then it is ok

3.Press the stick on the heat transfer press machine by the temp of 150-160 degree for 12-20 seconds with pressure of 2-3 KG

TIPS:

Kindly doing test before the bulk goods printing every time.

Silicone neck labels transfer printing with good fastenss and excellent hand feel.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用*标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?