Preparation:

1.Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.

2.Pigments added ratio:For white and fluorescent color 20%,other color 10%

3.Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.

4.Thinner XG-128A adding ratio:10-30% thinner is very necessary for brush printing

5.Heating Temp and time: Flash cure temp :100℃- 120℃ for 6-10 seconds ,Drying temp :120℃- 140℃ for about 2 -5 minutes.

Printing process :

1.Round silicone XG-866A-2Y for clear under coating 2 times :

Round silicone XG-866A-2Y 60G

Fast dry catalyst XG-866B-2 1.2G 2% If machine printing to use slow dry catalyst.

Thinner XG-128AH 6G 10%

Cure by temp of 120℃ 6-15 seconds.

If fabric with hairy or want to get more smooth effect kindly assist by heat press machine or iron after first time printing. After printing keep wet to heat press by temp 150-170 degree for 10-20 seconds.

2.Color layer silicone printing for 2-4 times :

Round silicone XG-866A-2Y 60G

White color pigment XG-102 10G

For white and fluorescent color 20%,other color 10%

Fast dry catalyst. XG-866B-2 1G 2%. If machine printing to use slow dry catalyst.

Thinner XG-128AH 6G 10%

Cure by temp of 120℃ 6-15 seconds. After printing finish, to heat by 120℃- 140℃ for about 2 -5 minutes.

3.Clear brush printing for 3-4 times :

Round silicone XG-866A-2Y 200G

Fast dry catalyst XG-866B-2 4G 2%

If machine printing to use slow dry catalyst. Thinner XG-128AH 20G 10%. Cure by temp of 120℃ 6-15 seconds.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用*标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?