Preparation:

1.Mesh&Squeegee: 100-120(40T-48T) Mesh number ;65-75 degree Squeegee.

2.Pigments added ratio:For white and fluorescent color 20%,other color 10%

3.Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.

4.Thinner XG-128A adding ratio:0-20% thinner is not necessary for hand printing

5.Flash temp :100– 120for 6-10 seconds

6.Curing temp: 160℃- 170℃ Second ,Silicone ink printing process: Under printing to print HD silicone ink is very important for puff and suede puff silicone ink,due to foaming materials will grasp the cloth when foaming

tips:

1.HD silicone XG-866A for under printing for 3 layers

HD silicone. XG-866A 100 G

Silicon catalyst XG-866B-2 2G 2% If machine printing to use slow dry catalyst

XG-866B-1 Flash by temp of 120℃ for 6-10 seconds.

2.Color Suede silicone printing for 3-4 layers

Puff silicone XG-866ART 100 G

Silicon catalyst XG-866B-2 2G 2%

Color pigment 10G 10% If machine printing to use slow dry catalyst XG-866B-1. Flash by temp 100-120 degree for 6-10 seconds

3.After finish printing to cure by 160-170 degree

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用*标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?