1.Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee

2.Catalyst mixing ratio:10% after mixing with catalyst about 1- 2 hours operation time

3.Flash cure temp :120– 130for 6-10 seconds

4.Curing temp :120℃- 130℃ for about 10 -20 minutes.

Flocking silicone printing tips:

1.Flocking silicone mixing :

Flocking silicone XG-20000A 100G

Silicone catalyst XG-20000B 10G 10%

Flocking agent XG-20000C 3G 3%

Silicone thinner XG-128AH 20-30G 20-30%

If dark color flock powder flocking then to mix with some similar color silicone pigments with flocking

silicone ink.

2.Flocking silicone printing :

Flocking silicone ink to print 3 times

For first printing need to flash by temp 120-130 degree , For second and third printing no need to

heat ,print wet on wet to get thicker application for flock by flocking machine.

3.Flock by flocking machine.

Have to keep totally wet to flock, after flocking to heat by temp 120-130 degree

4.Brushing and Air cleaning

5.After cleaning to cure by 120-130℃ for about 10-20 minutes

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注


Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?