Preparation:

1.Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee

2.Pigments added ratio:For white and fluorescent color 20%,other color 10%

3.Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using

4.Thinner XG-128A adding ratio:0-20% thinner is not necessary for hand printing 6.Heating Temp and time: Flash cure temp :100℃- 120℃ for 6-10 seconds ,Drying temp :120℃- 140℃ for about 2 -5 minutes

Silicone paste printing tips:

1.HD silicone XG-866AH for under coating for two times

HD silicone XG-866AH 60G

Fast dry catalyst XG-866B-2 1.2G 2%

Silicone thinner XG-128AH 6G 10%

Cure by temp of 120℃ 6-10 seconds.

2.Anti-migration silicone printing for 2-3 times

Anti-migration silicone XG-866F 60 G

Anti-migration silicone agent XG-866FB-1 1.2 G 2%

Fast dry catalyst XG-866B-2 1.2 G 2% If machine printing to use slow dry catalyst.

Thinner XG-128AH thinner is not necessary for hand printing,5-10% is enough for machine.

Cure by temp of 120℃ 6-10 seconds.Can not heat to be totally dry ,or will easy lead to be delamination.

3.Color effect silicone printing for 3-4 times

HD silicone XG-866AH 60G

White color pigment XG-102 12G For white and fluorescent color 20%,other color 10%

Fast dry catalyst XG-866B-2 1.2G 2%

Silicone thinner XG-128AH 6G 10% Cure by temp of 120℃ 6-10 seconds.

4.Matte silicone paste for top coating

Matte top coating for 1 time:

Matte silicone XG-866M 60G

Fast dry catalyst XG-866B-2 1.2G 2%

Silicone thinner XG-128AH 6G 10% Cure by temp of 120℃ 6-10 seconds. After printing finish, to heat by 120℃ for about 2 -3 minutes

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用*标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?