Suede silicone paste printing Tips

Preparation

1.Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee

2.Pigments added ratio:For white and fluorescent color 20%,other color 10%

3.Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using

4.Thinner XG-128A adding ratio:0-20% thinner is not necessary for hand printing

5.Flash cure temp :100℃- 120℃ for 6-10 seconds

Silicone paste printing tips

1.HD silicone XG-866A/866AH for under coating printing for 3 times

HD silicone/soft silicone XG-866AH/XG-866AR 60G

Fast dry catalyst XG-866B-2 1.2G 2% If machine printing to use slow dry catalyst.

Silicone thinner XG-128AH 6G 10% (XG-866AH better to mix with 10% thinner)

Cure by temp of 120℃ 6-10 seconds.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?