Catalyst XG-360B mixing ratio of 10%. Printing on the back of fabrics to get a high-density sharp effect by embossing machine. Gets a 3d silicone printing on fabric effect.
1.Solid Content: 100% (Embossing Silicone Ink)
2.Appearance: Transparent paste
3.Viscosity Pa.S: 800-1000
4.Hardness Type A: 35-40
5.Temp ℃: 120-200
6.Operation time: 2-4H
7.Shelf-life: 12 Months
Catalyst XG-360B mixing ratio of 10%.
Printing on the back of fabrics to get high-density sharp effect by embossing machine.
Easy to release from mold, good softness with good washing test results.
No fall off after washing resistance, no change shape.
Mesh number 80-120 (32-48T)
Embossing silicone ink XG-360KY: 50G
Embossing silicone catalyst XG-360B: 5G （mixing ratio 10%）
Silicone thinner XG-128AH: not necessary
Printing mixing silicone ink on the backside of the fabric
Machine set temp :
Upper mold 180 degree
Bottom mold 120-170 degree
Can stick a thin fabric on the printing fabric backside (depends on design )
Heating time 8-15 seconds (depends on temp and design size )
Related Hot Products:
Related Hot Articles: