Printing on the back of fabrics to get high-density sharp effect by embossing machine. Easy to release from mold, good softness, good washing test results.
1.Solid Content:100% (Silicone Ink Embossing)
2.Appearance: Transparent paste
4.Hardness Type A: 50-55
5.Temp ℃: 120-200
9.Test of washing:60 degree, one hour for 10 times
Catalyst XG-360BH mixing ratio of 10%.
Printing on the back of fabrics to get high density sharp effect by embossing machine.
Easy to release from mold, good softness with good washing test results.
No fall off after washing resistance, no change shape.
Mesh number 80-120 (32-48T)
Embossing silicone ink XG-360KY-55: 50G
Embossing silicone catalyst XG-360BH: 5G （mixing ratio 10%）
Silicone thinner XG-128AH: not necessary
Printing mixing silicone ink on the backside of the fabric
Upper mold 180 degree
Bottom mold 120-170 degree
Can stick a thin fabric on the printing fabric backside (depends on design )
Heating time 8-15 seconds (depends on temp and design size )
Related Hot Products:
Related Hot Articles: