1.Mesh&Squeegee: 120(48T) Mesh number ;

2.Squeegee 65-75 degree Squeegee sharp and flat.

3.Pigments added ratio:For white and fluorescent color 20%,other color 10%

4.Catalyst mixing ratio:2% slow dry XG-866B-1for small printing size , fast dry XG-866B-2 for large printing size and first under printing screen. Slow dry and fast dry catalyst can mix together for using to get mid dry..

5.Silicone thinner XG-128A adding ratio:0-20% :20% for 866AH ,not necessary for 866A ,matte and glossy silicone. 10% for anti-migration silicone.

6.Heating Temp and time: Flash cure temp :100℃- 120℃ for 6-10 seconds ,after finish printing to dry by temp :120℃- 140℃ for about 2 -3 minute

Silicone paste printing tips

1.HD silicone XG-866A/866AH for under coating and high density printing for 2-4times

HD silicone XG-866A/866AH 600G

Slow dry catalyst XG-866B-1 12 G 2% If big printing size to use fast dry catalyst.

Silicone thinner XG-128AH 20% for 866AH ,not necessary for 866A Cure by temp of 120℃ for 6-10 seconds.

If fabric with hairy or want to get more smooth effect kindly assist by heat press machine or iron after first time printing. After printing keep wet to heat press by temp 150-170 degree for 10-20 seconds.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用*标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?