Preparation:
1.Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.
2.Pigments added ratio:For white and fluorescent color 20%,other color 10%
3.Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.
4.Thinner XG-128AH adding ratio:0-20% (for brush and pulling stone printing need 20-30%thinner)
5.Heating Temp and time: Flash cure temp :100℃- 120℃ for 6-12 seconds ,Drying temp :120℃- 140℃ for about 2 -5 minutes.
1.HD silicone under coating for two times
HD silicone XG-866AH/866A 300G
Fast dry catalyst XG-866B-2 6G 2%
Thinner XG-128AH 30G 10%
Heating temp 120-140degree
