Mesh number 48T-60T, flash 7-8 sec with temp 120°C tear resistance, not easy to deformation
1.Color transfer silicone layer print 4 + layers
Transfer silicone XG-866A-2Y 100G
Silicone Pigments 10%
Silicone catalyst XG-866B-2 2%
Silicone thinner XG-128AH 10-20G 10-20%
Each layer must flash to dry before print another,If need high density then print more layers
2.Crossing linker print for 3 layers
Crossing linker XG-360Z-3X 50G
Crossing linker catalyst XG-866B-2 2.5 G 5%
First time need to flash dry ,last 2 times do not flash
3.Hot melt glue XG-360R-2 print for 4-6 layers
yclohexanone to liquid the glue,mixing ratio 10%,if glue to be thick and choke the mesh screen Flash by room temp or by 80-100 degree.
4.After finish, put into the oven to bake by 100 degree for 30 minutes .
5.Heat press the sticker , Cut the label into pcs and press on fabric ,After it gets cool , tear the paper,The label will be firmly stick with fabric
