1.Molding silicone ink mixing
Molding silicone ink XG-360W 50G
Molding silicone catalyst XG-360WB 5G （mixing ratio 10%）
Silicone thinner XG-128AH : 0-10%. Silicone pigments 2-5%
2.Vacuum by vacuum machine for 1 time
3.Fill the mixing silicone on the mold move to vacuum by vacuum machine for another 1-2 times
4.Embossing Machine set temp
Upper mold 180 degree. Bottom mold about 50 – 60 degree
Heating time 8-15 seconds (depends on temp and design size )
Heat press the vacuumed molding silicone ink on the fabric.
