Preparation:
1.Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.
2.Pigments added ratio:For white and fluorescent color 20%,other color 10%
3.Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.
4.Thinner XG-128A adding ratio:0-20% thinner is not necessary for hand printing
5.Heating Temp and time: Flash cure temp :100℃- 120℃ for 6-10 seconds ,Drying temp :120℃- 140℃ for about 2 -3 minutes.
Silicone ink printing tips:
1.Special agent for under coating for two times
Crossing linker XG-360Z-3 30G
Crossing linker agent XG-360Z-3B 1.5G 5%
