1.Mixing moulding silicone ink
Moulding silicone ink XG-360W 50G
Moulding silicone catalyst XG-360WB 5G (mixing ratio 10%)
Silicone thinner 0-10%
Silicone pigments 2-4%
2.Vacuum by vacuum machine
Mixing together well and vacuum by vacuum machine
Fill the liquid moulding silicone on the mold move to vacuum by vacuum machine
3.Fill the vacuumed silicone ink on the mold
4.Vacuum by vacuum machine again
5.Heat press by embossing machineEmbossing Machine set temp:Upper mold 180 degree
Bottom mold about 50-60 degree
Heating time 8-15 seconds (depends on temp and design size)Heat press the mold that with vacuumed silicone ink on the fabric
