Tips:
1.Dispensing Multi-color molding silicone
A.Color effect molding silicone ink mixing
Moulding silicone XG-360W 60G. Silicone catalyst XG-360WB 6G 10%
Silicone pigments 1.8-3G 3-5%. Silicone thinner XG-128AH-1 30G 50%
B.Vacuum mixing color molding silicone ink
C.Dispensing Multi-color molding silicone
D.Curing by 150-220 degree for 1.5-3 minutes in oven,have to do the test about temp and heat time,can not heat too much to get ink 100% dry,or will have color layers peel off problem
E.Cooling
2.Filling moulding silicone as bottom part
A.Color effect molding silicone ink mixing
Moulding silicone XG-360W 60G. Silicone catalyst XG-360WB 6G 10%
Silicone pigments 1.8-3G 3-5%. Silicone thinner XG-128AH-1 6G 10%
B.Filling color molding silicone
C.Get the hot melt film on the silicone ink filled layer
3.Machine heat press including vacuum , venting and curing together ,this should get special machine with Vacuum funtion together
Cure temp : Upper & Bottom temp 130-140 degree for 1-3 minutes ( this time including vacuum ,venting and heating together ) Heat press for about 1 minutes including vacuum and curing.
4.Shift the stickers on the position paper
5.Heat press the stickers on heat press machine by 160-170 degree for 15-30 seconds
