Preparation
1.Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.
2.Pigments added ratio:For white and fluorescent color 20%,other color 10%
3.Catalyst mixing ratio:10% slow dry XG-MB-1 Mid dry XG-ZB-1
4.Silicone thinner XG-128A adding ratio:0-20%
5.Heating Temp and time: cure temp :80℃,100℃,120℃ or dry by room temp.
Silicone paste printing tips
1.Elastic silicone paste clear printing for 2-6 times
Elastic Silicone XG-130A 50G 50%
Elastic Silicone XG-130B 50G 50%
Silicone thinner XG-128AH 10G 10% Cure by 80℃,100℃,120℃ or dry by room temp If need fast dry then can mix with catalyst XG-866B-2 1-2%
2.Color effect silicone printing for 3-4 times
Elastic Silicone XG-130A 50G 50%
Elastic Silicone XG-130B 50G 50%
Silicone pigments XG-501 10G 10%
Silicone thinner XG-128AH 10G 10% Cure by 80℃,100℃,120℃ or dry by room temp If need fast dry then can mix with catalyst XG-866B-2 1-2%.
