Preparation:
1.Mesh&Squeegee:HD and glossy screen Mesh number 120-150(48-59T),CMYK Meshnumber300(120T);
2.Squeegee 65-75 degree Squeegee sharp and flat.
3.Pigments added ratio:For white and fluorescent color 20%,other color 10%
4.Catalyst mixing ratio:10%
5.Silicone thinner XG-128AH adding ratio:10-30%,brush printing need more silicone thinner.
6.Heating Temp and time:Flash cure temp:80℃-100℃ for 6-10 seconds ,after finish printing todry by temp:100℃ for about 2 -3 minutes,for wait 24 hours later can get ink total dry.This lowtemp type silicone ink,no need high temp curing.Elastic Silicone ink printing tips:
1.Elastic Silicone ink for under coating 2 layers
Elastic silicone XG-130D-3 100 G
Elastic silicone catalyst XG-130DB 10 G 10%
Silicone thinner XG-128AH 10-20G 10%- 20%
Flash by 80℃-100℃ for 6-10 seconds.
2.Black Elastic Silicone ink print 2 layers
Elastic silicone XG-130D 100 G
Black pigment XG-501 10G 10%
Elastic silicone catalyst XG-130DB 10G 10%
Silicone thinner XG-128AH 10-20G 10%- 20%
Flash by 80℃-100℃ for 6-10 seconds.
3.Chameleon powder silicone silicone effect print 2 layers
Silicone XG-20S-1 60G
Chameleon powders 6G 10%
Slow dry catalyst XG-MB-1 6G 10%
Silicone thinner XG-128AH 10-20G 10%- 20% Flash by 80℃-100℃ for 6-10 seconds
