TDS of Suede silicone

Preparation:

1.Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.

2.Pigments added ratio:For white and fluorescent color 20%,other color 10%

3.Catalyst mixing ratio:2% slow dry XG-866B-1 and fast dry XG-866B-2 can mix together for using.

4.Thinner XG-128A adding ratio:0-20%    thinner is not necessary for hand printing

5.Flash cure temp :100℃- 120℃ for 6-10 seconds

Silicone ink printing tips:

1.HD silicone XG-866A/866AH for under coating printing for 3 times :

HD silicone/soft silicone  XG-866AH/XG-866AR 60G

Fast dry catalyst    XG-866B-2  1.2G 2% If machine printing to use slow dry catalyst. Silicone thinner   XG-128AH  6G  10% (XG-866AH better to mix with 10% thinner) Cure by temp of 120℃ 6-10 seconds.

2.Suede silicone printing for 3-4 times

Puff silicone   XG-866ART   60 G 

Fast dry catalyst   XG-866B-2 1.2G 2%

Color pigment   6G 10% 10%

Flash temp 100-120degree After finish to heat by 160-170 degree for 2-3 minutes or heat press by heat press machine 165-170degree for 12-16 seconds.

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注

我们将24小时内回复。
取消

Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?