Silicone logo,Transfer logo,transfer silicone ,silicone transfer stickers by glue

Silicone ink PET films: Two types : one is glossy coating film which will be glossy after heating press on fabric ,another one is matte finish effect after heating press on fabric.

 Mesh number: 120-200 , Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks. Squeegee:65-80 degree .

Printing tips:

1.Silicone ink color layer printing for 3-4 layers :

 Silicone ink   XG-866A-2Y 100G

Pigments or special powders 10-20G (10-20% white&fluorescent 15-20% other colors 10%)

Catalyst   XG-866B-2 2G 2%

 Thinner   XG-128AH 10-20G 10-20%

 Flash by 100 to120 degree.

2.Silicone ink clear layer printing 2 -4 layers if needed for high density stickers,if need more high density then print more times clear.
Silicone ink XG-866A-2Y 100G
Catalyst XG-866B-2 2G 2%
Thinner XG-128AH 10-20G 10-20%
Flash by 100 to120 degree.

3.Mid layer crossing linker printing for 2 times:
Crossing linker XG-360Z-2 50G
Crossing linker agent XG-360ZB 2.5G 5%
Flash by 100 to120 degree.
4.Hot melt glue XG-360R-2X print for 4 layers. To use cyclohexanone to liquid the glue,mixing ratio 10%.This type of glue easy to be thick and mesh clogging ,so if feel thick and hand to print then can mix with some cyclohexanone to liquid it and get easy printing. Flash by room temp or by 80-100 degree.
5.After finish, put into the oven to bake by 100-120 degree for 40 minutes to 1 hour.

  1. Press the stick on the heat transfer press machine by the temp of 160-170 degree for 10-16 seconds with pressure of 4KG

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用 * 标注


Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?