OUR COMPANY

Our company  was established in 2007,Factory Huizhou Yirun Silicone Co.,Ltd was founded in 2018,all products follow the standard of NIKE,ADIDAS-01,pass and achieve REACH,OEKO-TEX-100,ZDHC certificate.All raw material,finish products tested by Heavy metal test,Halogen test,Tensile test ,Yellowing-resistance test,etc.provide all products ′MSDS,TDS and technical support.

Service

Product

Process

Step1: Dipping silicone Clear layer 1 time

Dipping silicone XG-20S    100G
Fast dry catalyst  XG-KB    10G    10% (10G silicone to mix with 1G catalyst)
Thinner XG-128AH         100-120G     100-120% (10G silicone to mix with 10-12G thinner)
To dip one time and wait about 40-70 minutes to get ink layer surface dry by room temp,after ink layer surface dry to heat cut.

Step2: Dipping silicone Color layer 2-3 times

Dipping silicone XG-20S    100G
Color pigment         2-4G     2-4% (10G silicone to mix with 0.2-0.4G color pigment)
Fast dry catalyst     XG-KB    10G  10% (10G silicone to mix with 1G catalyst)
Thinner XG-128AH         100-120G  100-120%  (10G silicone to mix with 10-12G thinner)
To dip 2-3 times color dipping silicone ,after dipping to wait about 20-30 minutes to get ink layer surface dry by room temp to dip the other times.

Step3:  Dipping matte or glossy silicone for top coating dipping

Matte silicone   XG-136M    100G or Glossy silicone  XG-399 for supper glossy
Fast dry catalyst  XG-KB    10G  10%  (10G silicone to mix with 1G catalyst)
Thinner XG-128AH         100-120G   100-120%  (10G silicone to mix with 10-12G thinner)
If need supper glossy effect then need dip glossy silicone ,due to glossy silicone is very liquid so 100% is enough no need 120%.Like 10G glossy silicone mix with 10G thinner.
After finished to wait for at least 1-2 days to get silicone ink 100% dry.

Shoelace Dipping Silicone Effect

Video