Underwear Bonding Silicone Ink XG-866NY

3D silicone ink for bra seamless bonding

Heating Temp and time: Flash cure temp : 120℃ for 6-10 seconds ,Drying temp :100℃for about 10 minutes.

SKU: XG-866NY Category:

Underwear Bonding Silicone Ink Parameters

1.Solid Content:100% (Underwear Bonding Silicone Printing Ink)

2.Appearance: Transparent paste

3.Viscosity Pa.S:800-1000

4.Hardness Type A: 30-35

5.Flash temp ℃: 100-120

6.Operation time:2-4H

7.Shelf-life:12 Months

8.Package:20KG

heat-transfer-silicone-ink-roung-silicone-ink
heat-transfer-silicone-ink-roung-silicone-ink-and-fast-dry-catalyst

Preparation:

1.Mesh&Squeegee: 60-80(24-32T) 65-75 degree Squeegee.

2.Catalyst mixing ratio:3%

3.Silicone thinner XG-128A adding ratio:20-30%  

Heating Temp and time: Flash cure temp : 120for 6-10 seconds ,Drying temp :100for about 10 minutes.

1.Screen printing silicone ink for underwear bonding printing:

Underwear bonding silicone ink print 5 layers:

Underwear bonding silicone    XG-866NY-2       100G

Silicone thinner                 XG-128AH         20-30G  20-30%

Fast dry catalyst                XG-866B-2          3G   3%

Cure by temp of 100-120℃ 8-12 seconds.

2.To print Underwear bonding silicone ink wet on wet two layers.

The same mixing ratio as above.

3.To stick a piece of underwear fabric on printed fabric, and smooth by empty printing

4.Cure by 100-120℃ 8-12 seconds.

5.Embossing heat press by 180 degree for 20 seconds

6.Cure by 100 degree for 10 minutes

How to print silicone for under wear bonding?

 

    Send an Inquiry Message About our Silicone ink:

      Send an Inquiry Message About our Silicone ink:

      Leave a Reply

      您的电子邮箱地址不会被公开。 必填项已用*标注

      我们将24小时内回复。
      取消

      Hi ,this is Kingjoe,May I have your name? Which type of silicone ink are you interested in?